What Size Septic Tank Do You Need?

The septic system is an astounding and innovative piece of technology. The device is natural and energy efficient. If you are planning on installing a septic tank, you will need septic lines, a septic tank, permit from your local government, and choose the appropriate location for installing the tank.
A septic tank operates by sewage being carried from the house to the tank using gravity instead of using motors and fossil fuel energy. The sewage moves by means of gravity from the tank to the drain field. Microbes in the ground digest and sanitize the bacteria, viruses, and other harmful substances. When the soil is healthy, clean water returns to the water table. The location of the tank and lines will depend on the percolation test. Another important feature is the size of the septic tank.
There are a few ways you can determine the size of the septic tank for your home. The size of the septic tank can be determined by basing it on the water usage or home size. The most productive and efficient way to calculate the size of the tank is through water usage. The size of the septic tank that will be required is based on the amount of water it will conduct through the field lines.
Calculations by Water Tank
Based on the total water usage of a home, the following is the expert and local government recommended tank size:
Up to 500 gallons per day: 900 gallon tank
Up to 700 gallons per day: 1,200 gallon tank
Up to 900 gallons per day: 1,500 gallon tank
Up to 1,240 gallons per day: 1,900 gallon tank
It is important to be aware that the minimum size tank normally permitted for use in a residential home is 1,000 gallons. Make sure you check with your local governmental official to obtain their regulations of size.
Calculations by House Size
This type of calculation assumes that all rooms in the home will be used. The following is the expert and local government recommended tank size based on calculating the house size:
One or two bedrooms: 750 gallon tank
Three bedrooms: 1,000 gallon tank
Four bedrooms: 1,200 gallon tank
Five or six bedrooms: 1,500 gallon tank
Make sure you check with your local governmental official to obtain their regulations of size.
For single-family homes, tanks normally vary in size from 500 to 1500 gallons of sewer storage capability. For a one or two bedroom house, a 1000 or 1200 gallon tank is used most often.
The costs of septic tanks will vary. The average 1,000 gallon septic tank will cost between $500 and $700. If you want to install a 1,250 gallon tank, the price can range from $600 – $800. One can install a tank in either the front yard or the backyard. The area must be able to hold the tank and drain field. The cost of installing a standard septic tank can be anywhere from $1,000 to $2,500
Septic tanks are a necessity and required by law for residential houses. When installing a septic tank, make sure you are aware of all of the local governmental regulations.

READ  Lewisham Council