Spartanburg Pressure Washing Service: Tips for Outside Surfaces

Want to remove grime and dirt with ease? Pressurized washing is the answer to this problem. It can clean all types of exterior surfaces and restoring it to an almost brand-new condition. Before we get started, we have tips to help people get the most out of their money, time, and efforts.

We also listed some things that do not stand up well to pressurized washing. If you do not have a pressure washer and do not want to spend a lot of money buying one, do not worry. They are usually available for rent at equipment rental shops or hardware stores. Just make sure that you get a copy of the device manufacturer’s guidelines or get a thorough tutorial from the store or shop before starting your project.

Safety tips when doing pressure washing

Always follow the instruction – Make sure to review the manufacturer’s instructions before doing the task at hand. Like most devices, each model and brand have some nuances that make it pretty unique. Even if the person has some experience using a power washer, it is imperative to learn how to use the actual device that you are about to use.

How does pressure washer work? Visit this site to find out more.

Protect yourself – Pressure washing uses pressurized water coming out of the nozzle. The pressurized water is pretty dangerous if not used properly. Not only that, but you will also be using different types of chemicals and cleaning solutions to get the best result possible. Always wear protective gloves, long sleeves, pants, and closed-toe shoes to protect your skin. Not only that, but power washers also generate a little noise, so using ear protection is always a good idea.

READ  Signs Your Air Ducts Need Cleaning

Protect the outer areas – cover vehicles, plants, or things that you do not want to get hit by the pressurized water or something that could be damaged. If homeowners are not going to cover these items and use chemicals in their spray, make sure to douse it with water first. Dru leaves can absorb more chemicals compared to the wet ones, so dosing the leaves with water using a garden hose can offer some kind of protection.

Pay attention to every accessory – Always attach accessories like nozzles before turning the pressure washer on. Watch the nozzle when it is in use, so it does not come loose. May sure to pay attention to the direction the nozzle is spraying and not point it at people, fragile surfaces, or animals. Never leave the device unattended. As all equipment and tools inside the house, leaving the device unattended is a terrible and dangerous idea unless it is put away or turned off.

Know when to get professional help – Don’t be afraid to get professional help for anything you need to clean over one story. Do not tackle your home or property’s roof; it is pretty dangerous to do some work on the roof, so leave it to the professionals. They have the right equipment or tools needed to get two or three stories without using ladders. Roofs can be very dangerous to work on, and they are also easy to damage. Without the right tools or equipment, homeowners with no experience doing these things can do more harm than good.

READ  3 Reasons to Add a Cargo Lift to Your Home

Check out http://www.healthycleaning101.org/types-of-household-cleaning-products to find out more about different cleaning solutions.

Pressure washing tips to get the best result

Skip the bugs, especially the spiders – Insect nests, especially spider webs, are almost impossible to remove using pressurized water. Homeowners need to go old-school using a dusting wand or a broom to help remove these insect nests before using a power washer.

Pre-soak the area with low-pressure water – Presoaking the working area using low-pressure water will help loosen the dirt. It can save homeowners a lot of time and money on chemical costs.

Recommended materials – Only use chemical formulas or detergents recommended by the device manufacturer for items you are washing. Look for products that are not only recommended by the device manufacturer but also detergents or chemical formulas approved for the surface you are washing. For instance, you do not use chemical formulas that work best for concrete driveways when cleaning the house’s sidings.

Use hot water – Warm or hot water works a lot better when removing dirt and grime compared to cold water, and it will let homeowners use less detergent or cleaning solutions. Like washing dishes at home, the warm or hot water does an excellent job of loosening up stuck up grime and dirt.

Up and down – Make sure to wash the area from bottom to top and rinse from top to bottom. Work in sections to ensure that you clean everything. Immediately rinse the site so that the cleaning solution does not have a chance to dry. Direct the water downward to help force the dirt down instead of wedging it into seams and cracks.

READ  4 Creative Housing Options

Water pressure – Professional contractors usually use four to six gallons per minute at 1,500 to 3,000 psi or pounds per square inch for most tasks. Most of these tasks can be accomplished using less force at three gallons per minute and more or less 3,000 psi. Wood is different since it can be damaged by the very strong pressure. If you are cleaning wood items or structure, make sure to use a washer with 500 to 2,000 pounds per square inch pressure.

Choose the right nozzle – The nozzle that homeowners choose has essential considerations: the size of the hole, as well as the angle of the spray. These two features determine the pounds per square inch and gallons per minute. Larger nozzles mean that the psi are reduced, but water flow remains the same.

Spray angles range from 25° to 65° with a midpoint of 40°, a favorite among professional contractors, especially in the Spartanburg pressure washing industry. Smaller spray angles can remove stubborn grime and dirt, but it also increases the possibility of streaking and damage.

Pressure washing can be an easy and quick way to get your property looking brand-new again. An essential thing to remember is to use tools recommended by manufacturers – for best results and safety. Starting farther away and slow will give homeowners an idea of how effective this cleaning method will be. Property owners can gauge how much closer they need to move to get the best result possible without damaging the property.