There are many people who want to change the way their flooring looks, especially if they have old style tiling. This is when laminate flooring is the perfect way to go ahead. It is very simple to install one on top of the other one by simply laying the flooring over. Any person can do it as a weekend DIY project.
However there are some things you need to know before installing it, so you get the best job for your home flooring. Maybe the most important aspect is to adjust the actual temperature for your floors and the room level of humidity. The room temperature should be anywhere between 68 and 85 degrees. Also the best humidity level should be between 45-65%. Anything above or below that will warrant using a humidifier or dehumidifier for regulating it.
When it comes to actual installation, you need to take off the molding and then check that the tiles are all dry, clean and level without any extra bumps. If you feel any bumps on it, you can level it using leveling cement so that you have a smooth surface ahead of you. The next step is to rollout the floor underlayment avoiding the edges from overlapping. This should exactly match the size of the room.
The step on laying the laminate flooring is usually done from left to right and spacers can be used to keep the spaces, or gaps that are between the planks. The space for expansion should be around 1/4 inches. The firs plank should be laid by first placing the plank right against the wall. The second plank should be 1/3 of the size of the first to give your flooring a nice alternate plank look that is so popular nowadays. The third plank will easily be able to connect the first plank right at the end to be locked in place the right way. Then you add the next (fourth) plank that will connect to the end of the previous one to be locked in place as well. Basically this will be the base upon the rest of your flooring will be built further.
What you really need to pay attention to though is to ensure that the very last row is exactly the same with the initial one. Also create a 1/4 inch space between the plank and the wall for expansion. Once you replace the trim, your laminate flooring is readily installed upon the old tiles.…